Combination Smoke and Carbon Monoxide Detector with AA replace Battery Operated Smoke CO Alarm Detector

About this item:

1. Complies with all current 10 year legislation in U. S. states/cities where required
2. Features electrochemical Carbon Monoxide sensing technology and photoelectric smoke sensor optimized to detect larger smoke particle produced by smoldering fires; helps minimize the number of false alarms
3. A loud 85 decibel alarm sounds when Carbon Monoxide, and Smoke levels begin to rise
4. Features a sleek, low profile design to blend more fully into the wall and out of sight
5. 3-year limited ; equipped with end-of-life signal chirp, so you know when it’s time to replace the unit for your safety
6. Faster turnarounds on job sites with the easy-to-install, most-trusted alarms in home safety

Specification:

Silence Mode

During the unit is alarming, you can push the test button,it will be paused the unit alarming for approx 10minutes. The red LED will flash once every 8seconds,it indicates the smoke alarm device is running into the silence mode. The silence feature is to be used only when a known alarm condition,such as smoke from cooking activates the alarm . The smoke alarm devicewill automatically reset after approximately 10minutes,if after this period,particles of combustion are still present ,the alarm will sound again .

CAUTION :
Before using the alarm silence (silence), identify the source of the smokeand be certain a safe condition exists .

Replaced Battery:

1. The low battery signal can last for maximum 30days, please replacethe batteries in time to keep it working properly.
2. Battery required:standard 1.5VAA batteries.
3. Correctly install the positive and negative poles of the battery(+&-)Waste batteries should not be placed into any household waste orrecycling bin as all of them have the potential to spark. Check with yourLocal Authority for recycling advice.

Test your Alarm

Test the unit to ensure proper operation by pressing the cover,the alarm will sound if the unit are working well. If no sounds, you can refer to“Trouble shooting”section for solution.

ACAUTION:
1. DO NOT test your alarm using an open flame. This may damage the smoke alarm, or ignite combustible materials and start a structural fire.
2. DO NOT stand close to the alarm when the alarm is sounding.

Mounting Alarms

1. Twist off the mounting bracket from the alarm .
2. Put the bracket on the installation position and mark the screw holes on the celing or the wall.
3. Drill two mounting holes in the marked place by an electric drill( The diameter of the drill hole is 5mm) and insert two plastic anchor plugs by hammer .
4. Screw the mounting bracket to the ceiling or the wall
5. Attach the alarm to the mounting bracket and turn clock wise to lock the alarm
6. If you have any question on installation, please contact your retailer .

WARNING : The installation instructions must be followed strictly incase of any injury .

Package List:

1 × Photoelectric smoke alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual

Qty:50pcs/ctn
Size:39.5*34*32.5cm
G.W:10kg/ctn

FAQ

Q:How about the quality of Smoke Alarm?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.

Q: Can i have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.

Q: Do you offer OEM service, like make our own package and logo printing?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.

Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.

Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.

Shenzhen Ariza Electronic Co., Ltd was founded in 2009 in Shenzhen, we are specialized factory with strength of security alarm products for 12years.Covering an area of 2000 square meters and we have 12 years experience on this market and have been one of the leading manufacturers of electronic personal security devices.OEM/ ODM is surpported, we pay more and more attention to new products development.

We have designed various popular models with Ariza features and own the patents and hundreds of new models for our clients all over the world, our clients such us: iMaxAlarm, SABRE, Home depot .

Workshop covering an area of 1000 square meters. We not only owns advanced production equipment but also have over 50 valuable and skilled employees.The monthly output reaches 100000PCS and 90% products being exported to overseas markets mainly in EU and North America.

Moreover, We have a comprehensive quality assurance systems and equipments, in addition to well-equipped laboratories and testing equipments. Systems of IQC, PQC,and FQC all ensure the quality of our products Finished product warehouse and raw material warehouse covering an area of 600square meters. We have enought room for finished goods, so the lead time is very short, the order of less than 1000 can be delivered within 3 days.

We also have gained certifications from the third party organizations, factory has passed BSCI, ISO9001 and all products are internationally recognized with CE or RoHS, FCC compliance for exporting to all over the world.

"Customer First"is our business faith, and we would like to share our knowledge, technologies and experience with more customers for mutual benefits and development.We will do our best to provide satisfied products and competitive prices for our customers. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.